automated device programming system

Automated Handlers

universal programmer

Universal Programmer

surge tester, impulse winding tester

Surge Tester

Impulse Winding Tester
training kit, logic analyzer

Logic Analyzer FPGA/MCU Training Kit

SU-320 Gang Universal Programmer

Stand-alone Universal Gang Universal Programmer X4
High-Expansion Flexibility
Introduction
SU-320 is a high speed gang universal programmer for engineering design and production purposes. It supports PC-based and Stand-alone programming modes and offers uniquely designed “X4” adapters allowing you to program 4 devices at the same time. CPLD, SPI NAND FLASH, NOR FLASH, SRAM, MCU, MICROCONTROLLER are all covered.

Features
  • Provides DUT 75MHz bandwidth and < ±2.5nS signal skew.
  • Provides stand-alone mode operation. With 5 keys and 20×4 LCD, you can select a project and easily start to program without PC.
  • Portable and compact design, minimizing the working space and maximizing the efficiency.
  • Provides IC insertion test and contact check before universal programming. In the AUTO mode, just insert the IC, and SU-320 will start all the processes automatically.
  • Provides high-expansion flexibility modular design. It can be used as single-site universal programmer or gang universal programmer.
  • Provides mass-production-oriented software with full log info for best traceability.

 Specification

  • Power Signal : 
    • Logic Signal Level : 1.5V~6.0V, 10mV
    • IOL,IOH Current : 10mA
    • Logic Signal Frequency : 75MHz (3~5V) / 60MHz (2.5V) / 45MHz (1.8V) / 25MHz (1.5V)
    • Signal Skew : <±2.5nS (3-5V)
    • Clock : 0Hz~75MHz
    • VDD & VIO Level : 1.5V~6.5V, 10mV
    • IDD & IIO Current : 400mA
    • VPP & VHH Level : 1.5V~15.5V, 20mV
    • IPP & IHH Current : 150mA
  • Display : 20X4 Character LCD / WORK & PASS LED
  • Button : Direction key x 4. START key with light x 1
  • Embedded Memory : 2 GBytes FLASH
  • Module Dimension : 120mm(L) × 75mm(W)
  • SU-320 Dimension : 240mm(L) × 115mm(W) × 60mm(H)
  • Weight : 1.1kg
  • Support Device : NOR FLASH, SPI EPROM, EEPROM, MPU, ARM, MCU, CPLD, NV-RAM…
  • Support File format : Binary/Machine Code, Intel HEX, TEK HEX, Motorola HEX
PC System Requirements
  • Operating System : Windows 10 / 8 / 7 / Vista / XP ( 32bits & 64bits )
  • Processor : Pentium 4 above
  • Memory : 2 GB RAM above
  • Hard Disk : Main program 500MB above / Buffer 2GB above
  • Communication : USB 2.0 High Speed

    CONTACT INFO

    LEAPTRONIX Headquarters
    TEL: +886-2-2999-1860
    FAX: +886-2-2999-9873

    Website:

    www.leaptronix.com

    Ryan
    TOP