High Voltage Differential Probe DP750-100

Bandwidth:100MHz

Max. Differential Test Voltage(DC+AC PK):750Vpk

Attenuation:50X ;500X

Gain Accuracy :±2%

High Voltage Differential Probe DP750-100

Bandwidth:100MHz

Max. Differential Test Voltage(DC+AC PK):750Vpk

Attenuation:50X ;500X

Gain Accuracy :±2%

Micsig high voltage differential probe DP750-100

1. The leads and probe are with shielded design, interface ends are integrated in a compact box;

2. No need to twist the cables, leads to a lower noise floor and has less interference. 

3. Support one-press Zero calibration and automatic overrange alarm;

4. Directly powered by Micsig UPI interface, auto match scaling setup with oscilloscope;

5. Can be powered by oscilloscope via USB cable.


1. The leads and probe are with shielded design, interface ends are  integrated  in a compact box;

2. No need to twist the cables, leads to a lower noise floor and has less interference. 

3. Support one-press Zero calibration and automatic overrange alarm;

4. Directly powered by Micsig UPI interface, auto match scaling setup with oscilloscope;

5. Can be powered by oscilloscope via USB cable.

Key Specifications

Model DP750-100
Bandwidth 100MHz
Rise time ≤3.5ns
Attenuation 50X ;500X
Gain accuracy ±2%
Maximum Differential Test Voltage(DC+AC PK) 50X: 75V
500X: 750V
Maximum input common mode voltage(DC+AC PK) CAT II 1000V
Input referred noise ≤ 12mVrms (50X)
≤ 120mVrms (500X)
Common Mode Rejection Ratio (Typical) > 80dB (DC)
> 60dB (100KHz)
> 50dB (1MHz)
Input Impedance 8MΩ||1.25pF(differential)
4MΩII2.5pF(single-ended to ground)
Output Voltage ≤1.5V
Power 1W
Power supply DC 5V USB, Micsig UPI interface
Overrange Alarm Flashing light
Dimension Power Supply Box: 80*37*22 mm
Signal In/Output Box: 49*25*12.5 mm
Input cable length 15cm
Output cable length 100cm
Operating temperature 0℃-40℃
Operating humidity 10%-85%

Key Specifications

Model DP750-100
Bandwidth 100MHz
Rise time ≤3.5ns
Attenuation 50X ;500X
Gain accuracy ±2%
Maximum Differential Test Voltage(DC+AC PK) 50X: 75V
500X: 750V
Maximum input common mode voltage(DC+AC PK) CAT II 1000V
Input referred noise ≤ 12mVrms (50X)
≤ 120mVrms (500X)
Common Mode Rejection Ratio (Typical) > 80dB (DC)
> 60dB (100KHz)
> 50dB (1MHz)
Input Impedance 8MΩ||1.25pF(differential)
4MΩII2.5pF(single-ended to ground)
Output Voltage ≤1.5V
Power 1W
Power supply DC 5V USB, Micsig UPI interface
Overrange Alarm Flashing light
Dimension Power Supply Box: 80*37*22 mm
Signal In/Output Box: 49*25*12.5 mm
Input cable length 15cm
Output cable length 100cm
Operating temperature 0℃-40℃
Operating humidity 10%-85%