HAUG RN Static Bar
The HAUG RN ionizing bar is a powerful and rugged piece of equipment. Its construction satisfies all technical requirements and it has proven its value repeatedly in the removal of electrostatic charges during roll, sheet, and web (continuous product) processing. Production interfering surface charges can be removed reliably and effectively, even at high operating speeds.
The coaxial high-voltage plug-and-socket connection of the HAUG system X-2000 offers a unique advantage in that the gastight high-voltage plug can be connected to the HAUG power pack easily and without tools. The flexible, coaxially shielded cable connects the ionizing unit with the voltage supply.
The round construction of the RN ionizing bars permits the exact axial adjustment in the direction of travel of the material. The ionizing bar is safe to touch. Special wear-resistant electrodes guarantee long service life.
HAUG VS Static Bar
The HAUG VS ionizing bar reliably removes electrostatic charges and its performance, when compared to the standard version, is three times the power. This tremendously improves the static removal and is designed to address extremely high charges, faster speeds, and greater distances.
The VS ionizing bar has all of the typical features that characterize HAUG ionizing bars: the reliable and removable plug-and-socket connection System X-2000, the shielded high-voltage cable, the special stainless-steel electrodes, and the convenience of being safe to touch.
The electrical capacity of the VS ionizing bar is three times as great as the standard version, and therefore, it is necessary to base any power pack load calculations on a bar length three times as long.
VS static bar – 50 cm with 200 cm cable
Power pack load: 3 x 50 cm + 200 cm = 350 cm
Explosion Proof Static Bars
Units for areas with potentially explosive atmospheres (ex zone)
HAUG has been a competent manufacturer of ionizing units approved for equipment in areas with potentially explosive atmospheres for many years. These are intended to eliminate unwanted electrostatic charges in areas where hazardous gases may form, such as paint plants or printing machines.
- Graphical industry: Screen, tampon, and offset printing machines etc.
- Paint shops: automotive paint applications, painting of plastic parts, etc.
Ionizing bars EI Ex T
The design of the ionizing bars EI Ex T complies with the International ATEX directivities. In combination with the power pack EN 92 Ex or Multistat Ex, it is suitable for use in manufacturing locations with potentially explosive atmospheres resulting from gases of explosion group IIA, temperature classes T4 to T6.
Further bar variations are available
These static bars can also be provided with high-voltage connection at the end of the bars for series connection of ionizing units (daisy-chain units end to end) or without HV-cable, suitable for connection of a flexible, separate high-voltage cable with elbows or tees – a variety of systems to “minimize” the need for excessive cable and extra power supplies.