ENGLISH
Trang chủ 
MÁY NẠP
HDS200 Series: Máy hiện sóng đa năng cầm tay/ 3-in-1 Digital Oscilloscope
- HDS200 Series Handheld Oscilloscope Introduction
Specifications
「Oscilloscope」Specifications
| Model | HDS242 | HDS272 | HDS242S | HDS272S |
| Bandwidth | 40MHz | 70MHz | 40MHz | 70MHz |
| Channels | 2-CH Oscilloscope | 2-CH Oscilloscope+1-CH Generator | ||
| Sample Rate | 250MSa/s | |||
| Acquisition Model | Normal, Peak detect | |||
| Record Length | 8K | |||
| Display | 3.5-inch LCD | |||
| Waveform Refresh Rate | 10,000 wfrms/s | |||
| Input Coupling | DC, AC, and Ground | |||
| Input Impedance | 1 MΩ±2%, in parallel with 16pF±10pF | |||
| Probe Attenuation Factors | 1X,10X,100X,1000X,10000X | |||
| Max. input Voltage | 400V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation) | |||
| Bandwidth Limit (typical) | 20MHz | |||
| Horizontal Scale | 5ns/div - 1000s/div, step by 1 - 2 - 5 | |||
| Vertical Sensitivity | 10mV/div - 10V/div | |||
| Vertical Resolution | 8 bits | |||
| Trigger Type | Edge | |||
| Trigger Modes | Auto, Normal, single | |||
| Automatic Measurement | Period, Frequency, Mean, PK-PK, Max, Min | |||
| Cursor Measurement | ΔV, ΔT, ΔT&ΔV between cursors | |||
| Communication Interface | USB Type-C | |||
「Multimeter」Specifications (Standard)
| Max. Resolution | 20,000 counts |
| Testing Mode | Voltage, Current, Resistance, Capacitance, Diode ,and Continuity test |
| Input Impedance | 10MΩ |
| Max Input Voltage | AC 750V, DC 1000V |
| Max Input Current | DC : 10A AC : 10A |
| Diode | 0 - 2V |
「Waveform Generator」Specifications (Only for HDS242S & HDS272S)
Frequency Output | Sine | 0.1Hz - 25MHz |
| Square | 0.1Hz - 5MHz | |
| Ramp | 0.1Hz - 1MHz | |
| Pulse | 0.1Hz - 5MHz | |
| Arbitrary | 0.1Hz - 5MHz | |
| Sampling Rate | 125MSa/s | |
| Channel | 1-CH | |
| Amplitude Range | 20 mVpp - 5 Vpp | |
| Waveform Length | 8K | |
| Vertical Resolution | 14bits | |
| Output Impedance | 50Ω | |
Accessories
The accessories subject to final delivery.
