Feature
All Available Models:
CRU Rackmount Duplicator (4U 19" rackmount) is expandable and can support between 1 and 254 targets CRU HDD. U-Reach adopted a unique multitasking technology that can simultaneously copy targets with a higher transfer speed of 18GB per minute. We guarantee the highest productivity without speed degradation. It supports the DX115 DC Carrier, and is currently the biggest CRU HDD duplicator on the market. There is no set up or software installation required and it is simple to connect to another KV500-C or KV600-C unit to extend target duplicator.
Impeccable High Speed
U-Reach SATA HDD duplicator is capable of copying at 18GB/min. on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.
Flexibility to expand target without slowing down speed
Requires only a simple connection between each unit to expand the targets.
Supports All Partition Format for Duplication
Easy to install and expand by stacking all the duplicators in a sturdy server cabinet.
Supports All Partition Format for Duplication
Whole HDD Copy supports various partition formats.Systems & Files Copy, reduces copy time and supports NTFS, FAT16/32/64, Linux (ext2/ext3/ext4) and Mac (HFS/ HFS+/ HFSX).
Various Sanitization Methods
Quick Erase
Erase HDD index table, and only takes A FEW SECONDS to complete
Full Erase
Erases the entire HDD
DoD Erase
Complies with U.S. Department of Defense erasure standards.
Secure Erase
A National Institute of Standards and Technology 800-88 accepted technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
DoD Erase with Compare Method:
Log Report Management
Records operation time, each port’s process details, including HDD’s model, capacity, S/N, result (pass, fail).Real-time recording and viewing Log Report via PC-Link.
Real-Time PC Monitoring
It is absolutely perfect for MONITORING the work progress during operation. It shows all the information for EVERY PORT, which is a powerful tool for sorting out the lagging writing HDD and keeping the operation efficient. All the information you need will be shown on a PC screen.
It’s able to monitor HDD Duplicator with duplication status from PC while duplicators are connected to it.
Shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports, the info of both sources HDD and target HDD are recorded.
Slow R/W speed HDD detection: lagging HDD can be easily sorted, because user can see the duplication speed of every port by “Event Log”.
To select a period of time in order to export part of the log data. Just one click, the data will be exported into.txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt)
Flash Duplicator
USB Drive Duplicator
SD/microSD Card Duplicator
CF/CFast Card Duplicator
SATA DOM/eMMC DuplicatorHDD/SSD Duplicator
SATA/SSD HDD Duplicator
SAS HDD Duplicator
CRU HDD Duplicator
Mini Duplicator
M.2 NVMe PCIe SSD DuplicatorAccessoriesSupport
Firmware
Warranty
FAQSolution
Write Protect Solution Flash Duplicator
Flash Card Mass Duplicaton
Flash Quality Checking Tools
HDD Data Secure Sanitizer
iSecuLog Tamper-free Log Report
Various Interface HDD DuplicatorNewsAbout U-Reach
Branches Worldwide
R&D Innovations
Corporate Milestones
ISO CertificationContact U-Reach
Copyright © 2021 U-Reach Inc. All rights reserved
PRODUCTS
SUPPORT
SOLUTION
Write Protect Solution Flash Duplicator
iSecuLog Tamper-free Log Report