NSTAR-600: High quality SMT solder paste mixer   Part#: WENZHAN NSTAR-600   Ghi chú: Máy trộn kem hàn NSTAR-600   Nhãn hiệu: WENZHAN (Trung Quốc)   Bảo hành: Bảo hành 12 tháng   Cấu hình: First rotation 1400RPM, second 400RPM   [ Tài liệu ]   [ Quotation ]   [ Shopping ]   [ Views: 811 ]   2023-11-07  ◊ Đặc điểm chính: SOLDER PASTE MIXER NSTAR-600 Máy trộn kem hàn Nstar-600 là sản phẩm máy trộn kem hàn chất lượng cao được phân phối từ công ty TNHH Giải pháp TULA, giúp tạo ra sản phẩm kem hàn nhuyễn, đồng nhất, và không chứa các bọt khí gây ảnh hưởng đến chất lượng sản phẩm làm ra khi sử dụng kem hàn trong công việc. Thông số kỹ thuật: Tổng trọng lượng: 45kg  Kích thước máy: 410*410*490mm Điện áp hoạt động: 220v ac( 50hz) 60W  Tốc độ hoạt động: Quay đầu tiên: 1400 rpm; thứ cấp xoay: 400 rpm  Công suất: 500g * 2 cốc  Thiết lập thời gian: 0,1 ~ 9,9 phút. Hiển thị và cảnh báo: Dẫn hiển thị kĩ thuật số, đèn nhấp nháy và cảnh báo buzzer Specifications: Model NSTAR-600 Power Supply AC 220V 60Hz 40W Rotation Speed First rotation 1400RPM, second 400RPM Speed ratio 3.5: 1 Container 500g / 1000g / 1000g (fixture to be replaced) at the same time stirring two cans of tin paste tank 500ed 1000g One/Two container operation. Tin-paste mixer agitating time Working timer 1-99 minutes digital adjustable 1 Sec.-99Min Tin-paste mixer operation mode Operational light touch button, Simple Touch panel operation Functions of tinpaste mixer jigs Holding universal jig, suitable for all kinds of factory brand tin paste tank Suitable different kinds solder past container. Tin paste mixer running noise Noise low running noise < 35dB Low operation noise7 Machine size Extemal 410x410x480mm (length × width × high)

Instructions for use of tin paste mixer

1. Machine features:

1.1 Stirring without prior removal of tin paste ice;

1.2 Do not need to open the container;

1.3 Single-phase 220v;

1.4 Water vapor problem;

1.5 Do not damage the shape of tin powder;

1.6 Jig suitable for all kinds of packaging tin paste tank;

1.7 Stirring. Time and stirring times can be set arbitrarily,

1.8 Has the function of manual speed regulation;

2. The operation panel of tin paste mixer describes the power switch reset switch time relay governor

3, Tin paste mixer installation and commissioning:

3.1 Installation

3.1.1 Please put the machine on a horizontally stable desktop or ground. Avoid abnormal noise or shaking when the machine is stirred at high speed;

3.1.2 Check the use voltage specification of the machine (AC220V) and connect to the single-phase 220V power supply;

3.1.3 Make sure that any screws are loose and there is no foreign body in the machine plate. Avoid collision.

3.2 Debug

3.2-1 To ensure that the machine is placed smoothly.

3.2-2 Place the tin paste tank to be stirred completely in the machine's fixture. Stir two 500G tin paste tanks at the same time. If you want to stir the 1000G tin paste tank, replace the jig.

3.2-3 Turn the tin paste tank once by hand. To confirm that there will be no collision, cover the top of the machine, and turn on the power switch.

3.2-4 Depending on the quality of tin paste and refrigeration conditions, adjust the panel time set to a better stirring time.

3.2-7, The operation of this operation can be stopped and cancelled according to the key of the power supply.

Operation steps and precautions

4.1 Operation step

4.1.0 After commissioning, open the top cover of the machine to confirm that there is no foreign body in the machine.

4.1.1 Turn the angle of the machine tin paste fixture, Place the tin paste tank to be stirred in the machine fixture.

4.1-2 Turn the tin paste tank around by hand to make sure there will be no collision, put the top cover of the machine on, and turn on the power switch.

4.13 Adjust the time on the panel to a better stirring time. Depending on the tin paste brand instead of the

4.1.4 Power switch, the operation indicator lights on. The machine starts to stir at high speed automatically until the machine is finished. Automatic stop.

4.1.5 Peration finished operation stop, the display screen shows the actual stirring time. Make sure that the machine stop operation after opening the top cover, remove the tin paste on the fixture can. At this point, the tin paste, which is softened and stirred evenly, can be used.

4.1.6 To stop the operation of the machine, according to the key of the power supply, stop and cancel the operation. Open the cover of the machine during the operation

4.1.7 This opportunity will automatically stop the operation. If you want to continue the agitation operation after putting the upper cover on, you do not need to press the power switch again.

4.1.8 After the quantity of production is finished, turn off the power switch;

4.2 Notice

4.2.0 In order to open the top cover of the machine after the operation of production, it must wait until the machine is completely stopped before opening: Paste cans or with Jack about

4.2.1 Two fixtures, the weight difference of not more than 50 grams. Otherwise, the machine will produce swaying in the high-speed stirring, please try to avoid;

5. Tin paste mixer regular inspection and maintenance matters

5.1 Please keep the machine clean;

5.2. Check the screws without loosening;

5.3. Before operation check the machine switch and upper cover matching sensitivity; 4, The machine bearing is completely closed, do not need lubricating oil.

NSTAR-600: High quality SMT solder paste mixer