70-1272A: Đế nạp DIL16W/SOIC16 ZIF 300mil SFlash-1a   Part#: ELNEC 70-1272A   Ghi chú: Dùng cho máy nạp rom ELNEC       [last update: 2024-09-10 (23)]   Nhãn hiệu: ELNEC (Slovakia/ Slovakia)   [ Tài liệu ]   [ Báo giá ]   [ Shopping ]   [ Views: 5638 ]   2021-04-07  ◊ Đặc điểm chính: specialized adapter for Serial Flash devices in 300mil SOIC/SOP/SO package with 16-pins designed for TurboMode operating (mechanical) warranty of ZIF socket - 10,000 actuations supported from PG4UW software version 3.05b made in Slovakia Ord. no. 70-1272A Socket ZIF SOIC16, OpenTop type Bottom 2x24 pins, square, 0.6x0.6mm, rows spacing 600mil Class Specialized Subclass Memory (NOR/NAND/eMMC)

Adapter manual

• Protect the contacts of adapter connectors and ZIF socket from contamination. Any dirt and/or fat on contacts may cause errors during programming.
• Usage of vacuum pick-up tool is expected for device handling.
• Proceed with care! Incorrect insertion of adapter in programmer ZIF socket or device in adapter ZIF socket may lead to programmed device damage.
• Insert adapter into programmer ZIF socket. If you are in doubts about orientation of the adapter in programmer ZIF socket, there is a rule of thumb - orientation of adapter name text is the same as orientation of the text on the top of programmer.
• Visually check the placement of adapter in programmer ZIF socket.
• Push the cover of adapter ZIF socket (the topmost movable part) to open the socket. Insert the device into adapter ZIF socket. Correct position of programmed device in adapter ZIF socket is indicated by picture near (usually on left above) the adapter ZIF socket. On that picture, reference corner of device (e.g. position of pin 1) is indicated by dot, by number 1, by bevelled corner or by any combination of mentioned. Then release adapter ZIF socket.
• Do not press on device while inserting it and/or releasing the cover.
• Visually check the placement of programmed device in adapter ZIF socket. If everything looks OK, the device is ready for programming.
• To take out the device from adapter, push the cover of adapter ZIF socket and remove the device.
• When you finish the work with adapter, remove it from programmer ZIF socket.
• Operating conditions: temperature 5°C ÷ 40°C (41°F ÷ 104°F), humidity 20% ÷ 80% non-condensing. 

Accepted package(s)

SOIC16

Usable for programmer(s):

BeeHive208S

BeeHive204

BeeProg2

BeeProg2C

BeeProg+

70-1270A: Đế nạp DIL8W/SOIC8 ZIF 200mil SFlash-1a	BeeHive204AP: Multiprogrammer for automated programming systems	Elnec s.r.o.: Thông tin về nhà sản xuất ELNEC	72-0011: Credit box CB-25k
BeeHive204: Multiprogramming system	BeeHive208S: Stand-alone Multiprogramming system	SmartProg2: Universal very fast programmer, USB Port and ISP capability, 40 Pins 11.500.000đ	BeeProg2: Extremely fast universal programmer and ISP capability
NRU-0083: Vacuum pen - bút chân không nhặt chip	BGA converters introduction: Giới thiệu về đế nạp kiểu BGA	Đế nạp: IC programming sockets (socket-unit, socket-adapter, socket-converter)	BeeProg3: Ultra speed universal 64-pindrive programmer, máy nạp rom đa năng 64-pin driver
BeeHive304: Ultra speed universal 4x 64-pindrive production multiprogrammer, Máy nạp rom đa năng 4 kênh 64-pin driver 7900$	PIKprog2 & T51prog2: ELNEC @ Discontinued	BeeProg2C: Extremely fast universal USB interfaced programmer	BeeProg2C & BeeProg+: ELNEC @ Discontinue BeeProg+ and release new model BeeProg2C
NRU-0085: Fiberglass pen, Bút sợi quang 250.000đ	KKO-0113: ZIF Socket DIL48, Đế nạp DIL48 kiểu kẹp ZIF	70-3081: Đế nạp DIL48/TSOP48 ZIF 18.4mm NAND-3	70-1277: Đế nạp DIL8W/TSSOP8 ZIF 170mil SFlash-1
70-3077: Đế nạp DIL48/TSOP56 ZIF 18.4mm NOR-4	70-1272A: Đế nạp DIL16W/SOIC16 ZIF 300mil SFlash-1a	ELNEC update latest released information - Cập nhật mới nhất từ Elnec	70-0079: Đế nạp DIL48/PLCC84 ZIF PLD-1
70-1227: Đế nạp Bottom TSOP48 NOR-1	70-1228: Đế nạp Top TSOP48 ZIF 18.4mm	70-1275A: Đế nạp DIL8/QFN8-5 ZIF-CS SFlash-1a	70-3081: Đế nạp DIL48/TSOP48 ZIF 18.4mm NAND-3
70-1272A: Đế nạp DIL16W/SOIC16 ZIF 300mil SFlash-1a