TULA.VN - Electronics Materials and Instruments in Vietnam  
       ENGLISH     
Trang chủ | Đối tác | Thư ngỏ | Sơ đồ web | Liên hệ
            
MÁY NẠP Jig test | THIẾT BỊ công cụ | VẬT TƯ hoá chất | LINH KIỆN phụ kiện | DỊCH VỤ GIỚI THIỆU | HỖ TRỢ
 SẢN PHẨM
 Máy nạp rom, Jig test
» Máy nạp rom đa năng
» Máy nạp Gang đa năng
» Máy nạp rom on-board
» Máy nạp chuyên biệt
» Hệ thống nạp tự động
» Phụ kiện đế nạp socket
»Xoá Rom, kiểm tra IC
» Sao chép ổ cứng, thẻ nhớ
»Jig test ICT/FCT/DIP-pallet
 Đo lường và kiểm tra
» Dao động ký oscilloscope
» Thiết bị viễn thông, RF
» Bộ thu thập dữ liệu
» Đồng hồ vạn năng số
» Máy phát xung, đếm tần
» Máy đo LCR, linh kiện
» Bộ đổi nguồn, tải điện tử
» Kit đào tạo, thực hành
 Các công cụ sản xuất
» Máy khò, mỏ hàn thiếc
» Tủ sấy, tủ môi trường
» Dây chuyền SMT Line
» Thiết bị sản xuất PCBA
 Thiết bị, công cụ khác
» Thiết bị Automotive
» Đo lực, cơ điện khác
» Thiết bị quang học
 Linh phụ kiện Điện tử
» Vi điều khiển họ 8051
» Nuvoton ARM Cortex-M
» Nuvoton ARM7/9 Soc
» Chip phát nhạc, audio
» Wireless RF IC, Tools
» Vật tư hàn, rửa mạch
 e-Shop thiết bị, vật tư
 Số lượt truy cập

257361109
lượt xem, tính từ 20/12/2006
 Ai đang online
Hiện tại có 0 khách và 0 thành viên đang online.

Bạn là khách. Bạn có thể đăng kí bằng cách nhấn vào đây



OUR PARTNERS
(Products Line-Card)



Flash Support Group

PEmicro

Power Supply

Shenzhen KESD Technology Co.,Ltd.



Car and Consumer IC Solutions Provider


  

Danh mục nội dung: Chuyên mục chính/1. Bộ nạp ROM (Device Programmer) - Thông tin chung và chỉ dẫn/1.5. Bộ nạp tự động (Automated Programmers)


      
  SuperBOT 5A/5E: Automated IC Programmer
  Part#: XELTEK SuperBOT 5A/ SuperBOT 5e
  Ghi chú: Hệ thống nạp rom tự động
  Nhãn hiệu: XELTEK (Trung quốc (China) / Mỹ (USA))
  Bảo hành: 12 tháng/ 12 months
  [ Tài liệu Datasheet ]   [ Báo giá Quotation sheet ]   [ Shopping Shopping now ]   [ Views: 2040 ]   2023-09-30
 ◊ Đặc điểm chính:

16-32 Socket Automated IC Programmer

Output up to 2,500 units per hour

Compatible for tray, tape In/out, tube in/out and laser or ink marker.

Great for medium to high volume programming. 

Suitable for Nor flash, MCU, E/EPROM, NAND and other device memories on the market.


 ◊ Mô tả chi tiết:

SuperBOT 5A and SuperBOT 5e

Fully Automated IC Programmer - up to 32-Sockets
 
When it comes to rapid IC programming you need a reliable and affordable automated system. The all-around SuperBOT 5 and SuperBOT 5e were designed by Xeltek to meet the most stringent programming requirements. The SuperBOT 5 and SuperBOT 5e support tape, tray and tube input and output. Both ink and laser are available for marking. Powered by four or eight ultra-high speed SuperPro 7500, the SuperBOT 5 and SuperBOT 5e have the capacity of up to 32 sockets for a phenomenal throughput of up to 2,500 units per hour. 
Standard Features
Model SuperBOT 5A SuperBOT 5e
Units Per Hour 2,500 2,100
Nozzles Quad Dual 
Tray Dual Fixed Tray Single Fixed Tray
Programmer SuperPro® 7500N SuperPro® 7500N
Sockets 32 16
Adapters 8 4
Vision Check Dual Camera Dual Camera
Tape Input Dual Dual 
Operating System Windows™ Windows™
Computer Built-In Industrial PC  Built-In Industrial PC 

Devices and Packages 

Supports: NAND, eMMC, NOR Flash and other device memories on the market

Package: WLCSP, SOT, BGA, TSSOP, PLCC & ETC

Size: 2mm - 25mm

Optional Accessories

Tray (up to 20 trays), tape in/out, tube in/out, and laser or ink marking

Support And Warranty 

Free factory training

5 years remote support and 1 year parts warranty

Real time support via direct message

Xeltek has been an industry leader for over 25 years, providing affordable reliable machines, quick support and responsive trouble shooting.

Lowest Total Cost Of Ownership

Xeltek provides free remote support for up to 5 years exclusive of material cost. 

Many customers come back to Xeltek for an upgrade within this period and use their current machine as a trade-in. 

Save a bundle with Xeltek SuperBOTs.

Featuares:

High Throughput SuperBOT 5A/5E is based on a high performance servo system that can program up to 2,100 UPH (units per hour) (for devices with programming time less than 36 sec) and is suitable for both small and large capacity devices. Throughput is up to 30 times higher than SuperBot 1, especially higher for large capacity devices like eMMC, NAND/NOR FLASH, SPI FLASH. It can be operated 24x7 and can provide throughput of up to 1,512,000 UPM (units per month). One person can supervise many SuperBOT machines and once they are programmed they can usually be left to operate by themselves.

High Performance Programmers SuperBOT 5A/5E are equipped with 4-8 SuperPro® 7500N high-speed universal programmers. Depending on the device programmed, each SuperPro® 7500N can have up to 4 sockets with a total of up to 32 sockets in the system. Most programmers in the market use technology which is up to 10 years old. The best current hardware technology is to use a high speed MCU chip built inside the programmer. SuperPro 7500 programmers employ a very high-speed MCU chip producing not only reliable programming algorithms but also increasing programming speed. Utilization of ARM11 32bit MCU combined with an internal Linux operating system makes them the most advanced and versatile programmers in the industry.

LAN Operation Most volume programming applications need programmers to be operated remotely and this can be achieved by using the LAN port on SuperBOT programmers. Programmers can be connected to a local network and be remotely controlled by any computer on the network via LAN (100M) port. LAN port enables remote project loading, quality monitoring, volume control, file security. Technical department can remote control programming operations and processes, including downloading project file, command execution, project settings, and obtain real time information to achieve production goals. Remote network management provides the most protection for intellectual property. Project data and files are never shared with operators because files are remotely loaded by authorized engineers.

The Most Durable and Reliable Systems in the Industry China is the hub of the world Electronics manufacturing and Xeltek automated programmers are widely installed at most major Electronic manufacturing plants with multiple installations at many locations. Most companies run production 24 hours/day and 7 days/week programming millions of devices per year. Xeltek automated programmers have been refined to run non-stop, withstand harsh and battle-ground like environment.

Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. Xeltek currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.

Better Yield Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Algorithms are performed with state machine architecture constructed with FPGA to achieve an ultrahigh programming speed. Along with the lo w voltage components selection, they program devices down to 1.2 volts.

Lowest Cost Automated Programming System in Market SuperBot automated programmers are the most affordable and high value systems in the industry. High volume and extensive production experience enables the programmers to be the most competitive in terms of quality, price, and value in the programming industry.

Powerful and Intelligent Software User-friendly software with graphical interface cuts learning curve. Setup data saved for next operation. Software also includes resourceful log table, convenient production and quality tracking, authorization, flexible stopping strategy for bad socket or module.

Chip Size Devices between 2x2mm to 30x30mm can be programmed. SuperBOT systems support the SOT23 package which measures only 2x3mm. We do not know of any other manufacturer who supports such a small package type and this is a testimony that SuperBOT systems excel in its accuracy and precision.

Short change-over time I/O devices and socket adapters are easily interchangeable and socket positioning can be performed automatically. Auto Tray and Tape-out can be permanently attached to SuperBot eliminating changeover time when moving from tape-out to auto tray. Tape-in feeder changeover time is below 10 minutes and laser marker changeover time between tray to tape is under 15 minutes.

Socket Cost and Investment Cost recovery in short period with low investment in the beginning as socket adapters are universal for up to 144 pin chips. For most of competitor programmers, user has to invest on device specific socket adapters for chips greater than 48 pins thus increasing cost in long term.

Technical Support More than 30 engineers are devoted to developing new programmers, socket adapters and device algorithms. Engineers are fluent in English and provide excellent direct support through emails, telephone, live chat an online ticketing system. With our locations in the United Stated and China, providing 17 hours of continuous support worldwide daily, we are confident to be able to provide support anywhere in the world.



 Thêm chi tiết:

SuperBOT 5/5e

Chips and Package Types

Chip Size

Min: 2x2mm, Max: 25x25mm

Devices Supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, and more.

Available Adapters

PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, WLCSP, SCSP, and more.

Air

Pressure

0.6MPa

Consumption

50 liters/min

Main Hardware and OS

Operation System

Windows™

Computer

Built-in Industrial PC

Hardware

SuperPro 7500

Remote Access

LAN Supported

Electrical

Power Adapter Type

AC

Output

220v

Power Consumption

1.5Kw

Dimensions

SuperBOT 5

Width(X): 850mm

Depth(Y): 1,280mm

Height(Z): 1,500mm

Weight: 450kg

SuperBOT 5e

Width(X): 850mm

Depth(Y): 1,100mm

Height(Z): 1,500mm

Weight: 300kg


Manual Tray (Standard equipped) Standard I/O device of the machine. Operator will replace the programmed tray from the SuperBot machine manually after the full tray is programmed. Customer does not need to buy any other accessory while using this option.

Auto Tray Device This device is an extension of the fixed tray. It includes tray-in and tray-out and users can put 20 trays into the device. When the machine is running, users can add trays or take out trays without stopping the machine. The auto tray device can also be installed outside of the whole machine and trays can be automatically changed without the need to open the upper cover, which saves tray changeover space and avoid human error during tray changeover. The auto tray device can stack up to 20 JEDEC trays. 

Tape-In Device Electric Tape in feeder. Tape width between 8 and 32mm applicable. Tape-in device can be configured as per the chip to be programmed. For SOIC and TSOP packages customer will need 2-3 types of different tape in the devices depending on the width of chips to be programmed. 

Tape-Out Device Connects to a SuperBOT for fully automatic operation. 8-32 mm tape widths can be used with the device. Output reel is sealed with heated tape. 

Tube-In Moves chips in the machine. Chip guider for different chip width (optional). IO is multi feed and upto 8 tubes can be operated at once (optional). Tube IO pages should also be updated accordingly.

Tube-Out Moves chips out of the machine. Chip guider for different chip width (optional). IO is multi feed and upto 8 tubes can be operated at once (optional). Tube IO pages should also be updated accordingly. 

Laser Marker System An optional attachment to the tape-out or the auto tray device for high speed marking. It marks up to 4 characters on the passed chips. 

Tape Ink-Marker Add-on item for tape out machine. On completion of programming the chip can be automatically marked with a point using ink (optional).  Tray Ink Marker Add-on item for auto tray machine. On completion of the programming the chip can be automatically marked with a point using ink (optional). 




CÁC SẢN PHẨM KHÁC CÙNG NHÀ SẢN XUẤT / OTHER PRODUCTS FROM XELTEK
A guide of using Xeltek SP7500: Video hướng dẫn sử dụng máy nạp Superpro 7500
SuperPro 6104: Máy nạp Rom/ Universal Gang Programmer
SuperPro 6104N: Máy nạp trình/ Universal Gang Programmer
SKU: ISP Header 01
1.850.000đ
NanJing Xeltek Electronic Co., Ltd.
SuperBot-4: Desktop Automated IC Programmer (Xeltek)
Dưới 1 tỷ VND
SUPERPRO 610P: Máy nạp trình/ Economy Universal Programmer
(Chính hãng) Giá rẻ nhất
SUPERPRO 611S: Máy nạp trình/ Economy Universal Programmer
SuperPro 7504N: Máy nạp trình/ Universal Gang Programmer
SUPERPRO/i3070: ISP programmer, utility card of Agilent i3070 ICT System
SUPERPRO IS01: Máy nạp trình/ Advanced ISP programmer
Đế nạp SA605B: (SOIC20) tương đương SA023A
XELTEK releases new programming products 601S & 600P
SUPERPRO 6100N: Máy nạp trình/ Universal Device Programmer
40.000.000đ / 34.000.000đ
June Newsletter @ Xeltek (USA)
SuperPro Z: Programmers Sale Has ENDED!
SuperPro IS02 In-System Gang Programmer
XELTEK @ TULA
Khuyến mãi 10% @ XELTEK
TULA Solution becomes an unique authorized distributor for Xeltek in Vietnam market
SuperPro IS03: In-System (ISP) Gang Programmer
Vietnamese Language @ XELTEK Universal Programmers, Superpro brand
SuperPro 7500 Programmer: Máy nạp rom Superpro 7500
SuperPro 7500N: Máy nạp trình/ Universal programmer
SuperPro 6104A+: Máy nạp Rom/ Universal Gang Programmer
SuperBot-3: Automated IC Programmer (Xeltek)
Tiền tỷ
SuperBot-2: Automated IC Programmer (Xeltek)
Tiền tỷ
GX0001: Socket Adapter
$125 + shipping fee
SuperPro X108: Máy nạp trình/ Universal Device programmer
SUPERPRO IS416: Máy nạp trình/ In-System (ISP) Gang Programmer
SuperBOT 5A/5E: Automated IC Programmer
SuperBOT 5X/5Xe: 32-48 Socket Automated IC Programmer



Thao tác người sử dụng: [ Thêm dữ liệu ]      [ Tải file lên web ]   

 





ĐIỀU KHOẢN SỬ DỤNG

Công ty TNHH Giải pháp TULA - TULA Solution Co., Ltd
VPGD: Số 6 Ngõ 23 Đình Thôn (Phạm Hùng), Mỹ Đình, Nam Từ Liêm, Hà Nội
Tel.: 024.39655633,  Hotline: 0912612693,  E-mail: 

 
Bản quyền © 2005-2024, Công ty TNHH Giải pháp TULA sở hữuGIỚI THIỆU | HỖ TRỢ